Reply To: MPCNC Version 2 -opinions-

New Home Forum Updates MPCNC Version 2 -opinions- Reply To: MPCNC Version 2 -opinions-



2x4s aren’t going to be very straight, which will make the surface not very flat.

If you have a table saw, or you can use a neighbor’s, ripping 3/4″ Plywood into 3″ strips, and making a frame out of that, with a 1/4″ plywood top and bottom would be pretty rigid, and straight.

Norm has a video with something similar (The box is at 6:45, if you can resist watching the whole thing):

I’ve been thinking about using the leg/wheel assembly on my MPCNC table.