So just a bit of follow up. I resized my machine down to a more realistic and manageable size. It is now 24×24 inches with the same 9.5 Z height. I also ran a second set of bars around the middle which seemed to help. The shifting, as best I can tell was from me printing too fast (around 50 mm/s) with a frame that wasn’t quite up to it. With these modifications and slowing down a little I am getting really good prints.
My next process will be getting this direct drive extruder off the bottom and putting a Bowden style extruder in to reduce that low end weight. So if anyone has a link to a good mount preferably with a fan please let me know!
Anyway thought I would touch base ad give you guys the newest news. Thanks for the help!