Reply To: Printing ToolMount and XY in a horizontal orientation

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Printing ToolMount and XY in a horizontal orientation Reply To: Printing ToolMount and XY in a horizontal orientation

#25261

Understood.

In PLA really i believe, not possible print in this way, really break.

I´m testing a ABS filament here, and printing this parts with this. On a double wall (2 perimeters only), adhesion is incredible good. Not possible separate the part using the hands….

To test, i will problably do a test, and report to you. I see the critical point is the two holes on the more wide face of the part (on XY part). If all things go wrong, i will loose about US$ 4.00 on matherial and 15 hours of printing time….. \o/