Reply To: RC7_MPCNC_LCD_9916. No heated bed

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC RC7_MPCNC_LCD_9916. No heated bed Reply To: RC7_MPCNC_LCD_9916. No heated bed

#29237

Ryan
Keymaster

//#define DUMMY_THERMISTOR_999_VALUE 100
// :{ ‘0’: “Not used”,’1′:”100k / 4.7k – EPCOS”,’2′:”200k / 4.7k – ATC Semitec 204GT-2″,’3′:”Mendel-parts / 4.7k”,’4′:”10k !! do not use for a hotend. Bad resolution at high temp. !!”,’5′:”100K / 4.7k – ATC Semitec 104GT-2 (Used in ParCan & J-Head)”,’6′:”100k / 4.7k EPCOS – Not as accurate as Table 1″,’7′:”100k / 4.7k Honeywell 135-104LAG-J01″,’8′:”100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT”,’9′:”100k / 4.7k GE Sensing AL03006-58.2K-97-G1″,’10’:”100k / 4.7k RS 198-961″,’11’:”100k / 4.7k beta 3950 1%”,’12’:”100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)”,’13’:”100k Hisens 3950 1% up to 300°C for hotend ‘Simple ONE ‘ & hotend ‘All In ONE'”,’20’:”PT100 (Ultimainboard V2.x)”,’51’:”100k / 1k – EPCOS”,’52’:”200k / 1k – ATC Semitec 204GT-2″,’55’:”100k / 1k – ATC Semitec 104GT-2 (Used in ParCan & J-Head)”,’60’:”100k Maker’s Tool Works Kapton Bed Thermistor beta=3950″,’66’:”Dyze Design 4.7M High Temperature thermistor”,’70’:”the 100K thermistor found in the bq Hephestos 2″,’71’:”100k / 4.7k Honeywell 135-104LAF-J01″,’147′:”Pt100 / 4.7k”,’1047′:”Pt1000 / 4.7k”,’110′:”Pt100 / 1k (non-standard)”,’1010′:”Pt1000 / 1k (non standard)”,’-3′:”Thermocouple + MAX31855 (only for sensor 0)”,’-2′:”Thermocouple + MAX6675 (only for sensor 0)”,’-1′:”Thermocouple + AD595″,’998′:”Dummy 1″,’999′:”Dummy 2″ }
#define TEMP_SENSOR_0 11 //MPCNC
#define TEMP_SENSOR_1 0
#define TEMP_SENSOR_2 0
#define TEMP_SENSOR_3 0
#define TEMP_SENSOR_BED 0

Change the last zero to 11 from most common thermistors.