Reply To: Z-axis Still giving me a problem after everything

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Z-axis Still giving me a problem after everything Reply To: Z-axis Still giving me a problem after everything

#29425

Matt
Participant

Thank you for continuing to help. I know this is probably frustrating for you too!

900mm/min was my setting for the XY not the Z, Z was set to 500 earlier and I have run it at 200 and still had the plunge issue.

I attached all the cam settings I could think of including speeds from the toolpath, and speeds set on the tool. I will have to make a second post with my post processor settings.