Reply To: Z-axis Still giving me a problem after everything

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Z-axis Still giving me a problem after everything Reply To: Z-axis Still giving me a problem after everything

#29582

Ryan
Keymaster

500mm/min is the absolute max our processor can handle but puts your stepper in its absolute weakest, 84mm/min would be peak speed and power.

I have linked this a few times, this is at the bottom. https://www.vicious1.com/software-updates/

So try your test again not running at the cpu max for the ramps and see if you get an issue. This is why I keep linking it.