Reply To: Minnesota Build

#29704

Kris
Participant

Thanks for the information on the spoil board.

I am now running into a bigger issue… All my parts I printed at 25.4mm thinking that the EMT in my area is 1″

I just checked two local places that have Allied EMT and neither the 1″ or 3/4″ will work.

The 3/4″ has an O.D. of 0.922

The 1″ has an O.D. of 1.163

This Allied EMT product was at my local Ace Hardware and a farm store.

So now I am hoping I can find a true 1″ in a larger town from me that has Lowes, Home Depot, Menards, etc.