Reply To: Fusion 360 Tool settings for 45 degree V-bit

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Fusion 360 Tool settings for 45 degree V-bit Reply To: Fusion 360 Tool settings for 45 degree V-bit

#29779

Gurft
Participant

ARGH, I figured it out. Here’s the answer if others run into this…

  • I was using 45 instead of 22.5 for the taper angle
  • When the text is wider than the bit diameter you need to a pattern cut first, and leave an offset with Fusion 360