Reply To: Software – getting started

New Home Forum Software Development Software – getting started Reply To: Software – getting started

#3237

Curt
Participant

Here is the first section of g-code. it does not make it through this before I get com errors. I am using EstlCam 8.064 and Repitier 1.5.6
Project 0102
;Created by Estlcam version 8 build 8.064
;Machining time about 12:45:16 AM hours

G90
M03 S24000
G00 Z5.0000

;No. 1: Engraving 1
G00 X28.2222 Y4.9742
G00 Z0.5000
G01 Z-1.0000 F0.100 S24000
G03 X18.6542 Y4.4404 I-0.2666 J-81.2443 F0.250
G03 X10.6980 Y2.9545 I5.9742 J-54.0324
G01 X10.4246 Y3.8806
G02 X15.2646 Y4.9355 I13.3541 J-49.6365
G02 X28.2222 Y5.9531 I12.6079 J-77.5363
G02 X41.1799 Y4.9355 I0.5204 J-76.3803
G02 X46.0199 Y3.8806 I-7.9858 J-48.2679
G01 X45.7465 Y2.9545
G03 X37.7902 Y4.4404 I-14.1411 J-53.6745
G03 X28.2222 Y4.9742 I-9.3671 J-81.8884
G01 Z-2.0000 F0.100
G03 X18.6542 Y4.4404 I-0.2666 J-81.2443 F0.250
G03 X10.6980 Y2.9545 I5.9742 J-54.0324
G01 X10.4246 Y3.8806
G02 X15.2646 Y4.9355 I13.3541 J-49.6365
G02 X28.2222 Y5.9531 I12.6079 J-77.5363
G02 X41.1799 Y4.9355 I0.5204 J-76.3803
G02 X46.0199 Y3.8806 I-7.9858 J-48.2679
G01 X45.7465 Y2.9545
G03 X37.7902 Y4.4404 I-14.1411 J-53.6745
G03 X28.2222 Y4.9742 I-9.3671 J-81.8884
G01 Z-3.0000 F0.100
G03 X18.6542 Y4.4404 I-0.2666 J-81.2443 F0.250
G03 X10.6980 Y2.9545 I5.9742 J-54.0324
G01 X10.4246 Y3.8806
G02 X15.2646 Y4.9355 I13.3541 J-49.6365
G02 X28.2222 Y5.9531 I12.6079 J-77.5363
G02 X41.1799 Y4.9355 I0.5204 J-76.3803
G02 X46.0199 Y3.8806 I-7.9858 J-48.2679
G01 X45.7465 Y2.9545
G03 X37.7902 Y4.4404 I-14.1411 J-53.6745
G03 X28.2222 Y4.9742 I-9.3671 J-81.8884
G01 Z-4.0000 F0.100
G03 X18.6542 Y4.4404 I-0.2666 J-81.2443 F0.250
G03 X10.6980 Y2.9545 I5.9742 J-54.0324
G01 X10.4246 Y3.8806
G02 X15.2646 Y4.9355 I13.3541 J-49.6365
G02 X28.2222 Y5.9531 I12.6079 J-77.5363
G02 X41.1799 Y4.9355 I0.5204 J-76.3803
G02 X46.0199 Y3.8806 I-7.9858 J-48.2679
G01 X45.7465 Y2.9545
G03 X37.7902 Y4.4404 I-14.1411 J-53.6745
G03 X28.2222 Y4.9742 I-9.3671 J-81.8884
G00 Z5.0000