Reply To: Bit recommendations for DW660

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Bit recommendations for DW660 Reply To: Bit recommendations for DW660

#3495

Ryan
Keymaster

In this video I used .5mm DOC, 20mm/s, finishing was .25 DOC, 35mm/s 45% step over. You should use these as a first test cut but after your sure everything is working smoothly use a 2mm DOC and work up from there. Keep the finishing DOC and speed the same and use a low step over.