Reply To: Bit recommendations for DW660

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Bit recommendations for DW660 Reply To: Bit recommendations for DW660

#3500

karltinsly
Participant

So I ordered these to start with: http://www.amazon.com/gp/product/B010NI39WO?psc=1&redirect=true&ref_=oh_aui_detailpage_o05_s00.

I was wondering about dressing the waste board. Most fly cutter bits seem very expensive, and it will probably take quite a while to do it with a 1/8 bit (my bed is 20×30 inches). Do these look like they might be good for dressing?

http://www.harborfreight.com/carbide-tip-straight-router-bit-set-3-pc-68869.html

Thanks for your opinions!