Reply To: Milling 3030 T-Slot Extruded Aluminum

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Milling 3030 T-Slot Extruded Aluminum Reply To: Milling 3030 T-Slot Extruded Aluminum

#39456

Jeffeb3
Participant

Hmmm. Yeah, setting up that cut is going to be the tough part, for sure…

You could put a 1/2″ chunk of ply in the CNC, then cut out an ‘L’ shape, with an overcut in the corner, then put the 3030 in that corner. That would make it square to the CNC, and have the right offsets. You’d just make sure the ‘L’ cut has the origin in the corner, and the 3030 cut has it’s origin in the corner, and then you just make sure you don’t turn the motors off between setups.