Reply To: Let's see those STANDS!!!

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Let's see those STANDS!!! Reply To: Let's see those STANDS!!!

#39894

Renegadez
Participant

in my build thread at the bottom you can see the table I just built. To keep from re posting the pics again check out the thread.

https://www.vicious1.com/forum/topic/completed-build-and-quick-test-drive/

Ok I finally got the $$$ and time to build a table for my MPCNC. I used Remix of Allted’s Simple CNC Table to make it parametric this help me so much! I also built the shelves separately and bolted it altogether. I added wheels this way I could move this heavy beast and also take it apart as it will not fit through any doors it is 48×48

Hardware
The Hillman Group 190201 Hex Bolt, 3/8-Inch X 4-Inch, 50-Pack
https://www.amazon.com/gp/product/B000BD5HD6/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1

The Hillman Group 830506 Stainless Steel 3/8-Inch Flat Washer, 100-Pack
https://www.amazon.com/gp/product/B000BD5HEA/ref=oh_aui_detailpage_o01_s02?ie=UTF8&psc=1

The Hillman Group 180303 Pronged Tee Nut, 3/8-Inch by 16-Inch, 100-Pack
https://www.amazon.com/gp/product/B000H5ZYP4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Rockler Screw-On Tee Nuts 3/8-Inch x 16 TPI, 8 Pack
https://www.amazon.com/gp/product/B000H5ZYP4/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

https://www.lowes.com/pd/Waxman-2-in-Rubber-Swivel-Caster/3026956
Waxman 2-in Rubber Swivel Caster
Item # 235514 Model # 4031299NN Aisle 15 , Bay 1
$4.97

CutList
ECHO: “*******************************”
ECHO: “** Cut 4 2×4 Legs 33″ Long”
ECHO: “** Cut 4 2×4 Top Ledge Lengths 45″ Long”
ECHO: “** Cut 2 2×4 Top Ledge Widths 45″ Long”
ECHO: “** Cut 2 23/32 Particle board Top Edges 48″ x 6″ Wide”
ECHO: “** Cut 1 23/32 Particle board Top Middle 48″ x 36″ Wide”
ECHO: “———————————————-”
ECHO: “** Cut 4 2×4 Shelf Ledge Lengths 45″ Long”
ECHO: “** Cut 4 2×4 Shelf Ledge Widths 45″ Long”
ECHO: “** Cut 2 23/32 Particle board shelves 48″ x 45″ Wide”
ECHO: “——————————————