Reply To: Stepper power and included motors in kit

New Home Forum Mostly Printed CNC – MPCNC Hardware Development – MPCNC Stepper power and included motors in kit Reply To: Stepper power and included motors in kit

#4143

Ryan
Keymaster

Sorry I should clarify. 1.2 on the X and Y axis. I think you can go to about .7 or .8 on the Z. Just check all the temps. Nothing should be hot. Really though at the voltages if you loose that fan there is a good chance you will loose the drivers. I would nudge it up a bit from stock but to be safe that’s fine.