Reply To: Temperature value odd in Repetier with 100 Ohm resistor

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Temperature value odd in Repetier with 100 Ohm resistor Reply To: Temperature value odd in Repetier with 100 Ohm resistor

#4147

hoth
Participant

The middle ends were super tight on the conduit but after scaling they fit really nice. And the roller-f that I built cracked when I shoved the conduit through. So I printed it scaled up and since I wrote last, I put it together – well, it’s way too loose. I just built up another of the original sized ones and while a bit tight, it still works pretty well. I think as the galvanizing on the conduit flattens out it’ll be just right. I did have to remodel the z motor mount though. The conduit holes were so tight I couldn’t get them on, but the nema 17 holes were just right. Might have something to do with my printer though. Either way, I’m working through all the parts bit by bit. =)