Reply To: Jamming conduit in to corner rails

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Jamming conduit in to corner rails Reply To: Jamming conduit in to corner rails

#4749

alan
Participant

Not sure if a post disappeared or what…

Anyway, calipers measure 23.49mm OD on the conduit, so that’s not the trouble.

The ID of the corner block (lower) was 22.57…meaning almost a MM to try to wedge open to fit the conduit. A little tighter than I originally expected.

Good news…that rail’s not ever coming loose.