Reply To: My MPCNC Build


Hi All, Thanks for the compliments, The conduit is from here it’s black enamel it does make the tubes slightly oversized so my axis are a little stiff but as I use it they are freeing up as the enamel gets crushed by the bearings, its got 15hours on it now and over the print bed they are practically frictionless. The white tubes are thinwalled tubes designed for wardrobe hanging rod replacement, they are very light which helps with the 3D print accuracy.

This is the laser module I will be fitting driving the TTL from repitier firmware which has 3d print laser and CNC capable off the bat with a simple Gcode command to swap between,searchweb201644_1_505_506_503_504_10020_502_10001_10002_10017_10005_10006_10021_10003_10004_10022_10018_10019,searchweb201560_3,searchweb1451318400_-1,searchweb1451318411_-1&btsid=0d6fc92c-5c13-4f40-9c26-e5b6fe4e24a1