New Home › Forum › don’t use this one, I need to sort and delete -Troubleshooting › 3D print shifting › Reply To: 3D print shifting
I’m not sure what you are asking. Those are the exact settings I use for the parts I send out.
What do your parts look like? You might be having a different issue.
I never really go lower than .2 anymore. There isn’t a ton of benefit of thinner layers and it cost a ton of time. I use the .2 if it has some steep overhangs, other than that I stick with the published settings. I did a print of my head at .1mm took 74hours, never again.