Reply To: Shaking when above 200mm/m feedrate

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Shaking when above 200mm/m feedrate Reply To: Shaking when above 200mm/m feedrate

#9137

Leo69
Participant

You can try bumping the speed up 100mm at a time until you see performance issues and at that point you can try increasing firmware acceleration settings with the lcd menu to see if you can get more out of it that way.if you find the movement gets sluggish once per second , timed with xy coordinate refreshing on the display, then we can deal with that issue separately.