2.8W Laser and Driver Kit and Mini-Rambo Board

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC 2.8W Laser and Driver Kit and Mini-Rambo Board

This topic contains 3 replies, has 2 voices, and was last updated by  Ryan 1 week, 6 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #45679

    pg TIPS
    Participant

    Hey all.

    Building my MPCNC and I be thinking on getting a laser for a big project I be doing when I get the basics sorted.

    Been looking at the J Tech Photonics laser, not cheap but I guess money buy’s quality and I feel I might be safer with it.

    My question is this, would the above kit work with the Mini Rambo board? At the J Tech website has instruction for the Ramps board bun not for the Rambo. Have I bought the wrong board for my application?

     

    Many thanks and sorry for such a newby question 😛

    #45680

    Ryan
    Keymaster

    I knew I had some info about his, took me a minute to find it, here you go. Bottom of that page.

    https://www.vicious1.com/mini-rambo-1-3/

     

    1 user thanked author for this post.
    #45681

    pg TIPS
    Participant

    Ahh crap!!!

    How did I missed that!

    Sorry Ryan, learning my way around the site 😛

     

    Many thanks.

    #45684

    Ryan
    Keymaster

    It’s alright took me a while and I am on the site all day everyday.

    1 user thanked author for this post.
Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.