A small jewelry box

New Home Forum Things You Have Made A small jewelry box

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Ryan Ryan 3 weeks, 4 days ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #36771
    Profile photo of Pinhas Gold
    Pinhas Gold
    Participant

    Here are 3 pictures of a small jewelry box made as gift.
    It consists of three parts. Base and cover are identical, the mid part is glued to the base.
    Also, both side of mid part are the same and had some work around for the best way to route these both side equally.
    Wood types are Poplar and Sapelli (Mahogany like)
    Dimension (in mm):
    95 X 65 X 48

    #36776
    Profile photo of Ryan
    Ryan
    Keymaster

    Oh goodness, that is excellent. I need to go buy a watch so I can make a watch box for it like this. Thanks for sharing it.

    #36780
    Profile photo of Jeffeb3
    Jeffeb3
    Participant

    @Ryan, you could make one for your calipers.

    #36782
    Profile photo of Ryan
    Ryan
    Keymaster

    Ohhhhh, that would level up my nerd credit for sure. I do have a caliper tattoo that is about 10″…so some might think I have a fetish…

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.