- February 12, 2017 at 8:23 am #27328
KronBjornParticipantFebruary 12, 2017 at 8:48 am #27338
So what I am hearing is you need me to come over and help you with your keg?
I mean CAD….hahahahFebruary 12, 2017 at 8:54 am #27341
That 4th axis is lovely in its simplicity.
If/when you get some free time could you make a very clear step by step post with lots of pics and screen shots on how to best setup and use that?
I would love to add it to the How-to section and feature it like I did with Jason’s mirrors (https://www.vicious1.com/laser-engraving-mirrors/). You will probably get swamped with questions, so it is kind of best to try and answer them before they happen. Or I could make you an author and you could make a article, which ever way you think would be easier…if you get some time. If not I can ask the questions and do the write up.
I love it and I think a lot of people would/should see it.February 12, 2017 at 12:10 pm #27357
Sure, I’ll make a write up when I get some spare time : )
Got the handle on, just need a bit of post processing, it is straight off the CNC.
Attachments:February 12, 2017 at 12:21 pm #27360
Custom handles and bottom fill taps….fancy!
You must be logged in to reply to this topic.