Best way to get help and get up and running fast.

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Best way to get help and get up and running fast.

Tagged: 

This topic contains 6 replies, has 3 voices, and was last updated by  +yo 4 days, 4 hours ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #4954

    Ryan
    Keymaster

    These things should all be included in your post. It makes it much faster to diagnose problems.

    1) Did you buy everything from here?
    a)If you didn’t or changed some things please don’t leave out any details and include what firmware you flashed.

    2) Are you using end stops?
    a)If so please disconnect them.

    3) Mac or PC?

    4) Include a picture so obvious errors might be spotted.

    #43565

    Moe
    Participant

    Hi Ryan  Why not use End Stop switch? I will be building my MPCNC as some I get the parts and I had plan to install End Stop switches. However you much have a good raison not to use them? Also Thanks for all the information you are putting on here, it really help us new comers to the world of MPCNC.

    #43566

    Ryan
    Keymaster

    I have a blurb about that in the FAQ’s.

    The basics, I promise it is much easier to learn things without them. With them you will need to account for work offsets and/or precise positioning of your work pieces, and if you are not using dual they might not home squarely enough to help with multiple process jobs.

    #43587

    Moe
    Participant

    OK Thanks, I will not use them. My work table is ready, my tubing are all cut and ready, will be picking up my MPCNC Parts in Calais ME this coming Friday. Also order one of those 3.5 watts Laser Cutter and Engraver from Banggood, have anyone try cutting Foam with it?

    Attachments:
    #43595

    Ryan
    Keymaster

    I used my laser to cut my foam stamp in the How to page. For the price of them it is a must have in my book….Lasers!

    #46066

    +yo
    Participant

    Hello, excuse my English, I’m using a translator.

    First of all, thank you for sharing this impressive CNC that serves everything! Thank you!!

    I have a small problem, it’s the time to print 3D, I’m used to using a Witbox printer and it gives me the option of loading or unloading the filament. Here I do not have this option, as it could be solved.

    Thank you very much.

    #46072

    +yo
    Participant

    Hello, to download the filament I have to change the position of the extruder cables …

    There is no way to work from the LCD?

    Control / filament / (charge) or (download)

    Thank you.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.