Bolt lengths

This topic contains 2 replies, has 3 voices, and was last updated by  Barry 3 weeks, 6 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #44657

    Jesse
    Participant

    Hi all,

    I live in Australia and M3.5 bolts are hard to come by so I have decided to use the 5/16th inch bolts. I can not get 1-1/4 inch length but can get 1-1/2 lenth. Would using the longer bolts pose any problems?

     

    Thanks in advance.

    -Jesse

    #44692

    Ryan
    Keymaster

    There will be a few places it might get a little tight (XYZ piece) but they should work. If not you can always grind them a bit to make them fit.

    1 user thanked author for this post.
    #44693

    Barry
    Participant

    Depending on where the bolts are, you may need to flip the bolt around so the nut is on the other end.  Should work alright though.

    1 user thanked author for this post.
Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.