Build complete

This topic contains 0 replies, has 1 voice, and was last updated by Profile photo of Kevin Kevin 8 months ago.

Viewing 1 post (of 1 total)
  • Author
  • #19938
    Profile photo of Kevin

    1st of course is major credit to the creator, such a nice machine you designed.

    Built using my printed parts, .ods (openoffice) spreadsheet attached. And I used the components kit from this site.

    78 hrs 41 mins print time on Lulzbot mini with ABS, same infil settings.

    1.675 total kg, I used 2 lb spools (UC3D), and the sheet shows the sloppy conversion, as well as the part split.
    I Love this filament no issues so far at all, for those interested:

    Green ended with .019 kg left, black with .120 kg left (again, for those using 2 lb spools, which is only .907 kg)
    Added a pen mount on thingiverse by dexterko

    …power outage at about 2 inches, which actually works great.

    Still need to design a Rotozip mount as the curvature is a bit wonky. But thrilled it works.

    Thanks again for sharing, total mind opener for me. )

Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.