Build Size

This topic contains 2 replies, has 3 voices, and was last updated by Profile photo of Bill Bill 4 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #34417
    Profile photo of Ralph
    Ralph
    Participant

    Hi

    Whats the actual build size using the original design? I’ve read somewhere that it was 200mm X 200mm but the Z was less that 200mm.

    Thanks

    #34425
    Profile photo of Mmmfishtacos
    Mmmfishtacos
    Participant

    I get 170 in the z direction. But my bed plate is 1/2 thick and i routed my wires out the side instead of over the top. Youd get more if you fillowed the build plan. But i havent needed more even when printing spitfire wings.

    #34585
    Profile photo of Bill
    Bill
    Participant

    I’m really close to an 8″ cube with mine, though I did have to work through some issues with wiring catching at inopportune moments when closing in on the top.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.