Cehbab's things

New Home Forum Things You Have Made Cehbab's things

This topic contains 11 replies, has 5 voices, and was last updated by Profile photo of Ryan Ryan 1 day, 12 hours ago.

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • #36741
    Profile photo of cehbab
    cehbab
    Participant

    I’ll add to this as a list as I build things.

    #36742
    Profile photo of cehbab
    cehbab
    Participant

    A LightBox for my wife, she’s used it every day for a week!

    Light_Box

    Attachments:
    1 user thanked author for this post.
    #36745
    Profile photo of cehbab
    cehbab
    Participant

    A little box to hold router bits.

    Pocketed out from a single piece of wood cut in half to test if I could.

    Router_Bits_Box_Open

    Router_Bits_Box_Closed

    2 users thanked author for this post.
    #36756
    Profile photo of Jeffeb3
    Jeffeb3
    Participant

    I need a box from some dimensional lumber!

    How did you attach the sides of the light box to the top?

    Thanks for sharing.

    #36761
    Profile photo of Ryan
    Ryan
    Keymaster

    I like it. That little box is gorgeous.

    #36823
    Profile photo of Johnny
    Johnny
    Participant

    I agree with Ryan, that little bit box is awesome! I might have to steal that idea once I get the CNC built.

    #36847
    Profile photo of cehbab
    cehbab
    Participant

    Re joins on the LightBox.

    Simple strip of wood.

    Nailed to the sides and glued.

    I then screwed this to the top.

    LightBox_Cornice

    The light globe mount was just flat 40mm metal put in a vice and bent with a sledge hammer :), the angle that holds the globe was a little bit of angle iron I ground out the globe slot and screwed it to the bent flat..

    LightBox_Globe

    Needs a mirror underneath for proper usage..

    Glass was 430x440mm x 5mm thick from one side of a fish tank at the recycling center in town ๐Ÿ˜€

    #36856
    Profile photo of Jeffeb3
    Jeffeb3
    Participant

    Those poor fish ๐Ÿ™

    Thanks for sharing.

    #36953
    Profile photo of cehbab
    cehbab
    Participant

    A wooden knob for my wood fire heater

    heater_knob

    Cut in one pass, center 8mm diameter, 10mm deep, outer rings, concentric at 4,8,12,16,20mm deep respectively. and a little sanding.

    Cheers

    Attachments:
    3 users thanked author for this post.
    #38893
    Profile photo of cehbab
    cehbab
    Participant

    A horse cut into a log!

    Started out as this log..
    horse_1

    After many many hours of a 6mm rough endmill cut, a 6mm finishing ball cut, and a 2mm finishing endmill cut, I turned it onto its side and made the side straight so it could stand up.. ..
    horse_2

    And the final result was this…
    horse_3

    Cheers.

    • This reply was modified 2 days, 3 hours ago by Profile photo of cehbab cehbab.
    • This reply was modified 2 days, 3 hours ago by Profile photo of cehbab cehbab.
    2 users thanked author for this post.
    #38902
    Profile photo of Barry
    Barry
    Participant

    That is cool!

    #38977
    Profile photo of Ryan
    Ryan
    Keymaster

    Sweet, and I like the table mod.

Viewing 12 posts - 1 through 12 (of 12 total)

You must be logged in to reply to this topic.