Collet Bushing Adapters

New Home Forum Mostly Printed CNC – MPCNC Advice – MPCNC Collet Bushing Adapters

This topic contains 3 replies, has 2 voices, and was last updated by  P3DCNC 8 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #27018

    P3DCNC
    Participant

    Hey gang, thought I’d share this. I was looking for an 1/8″ collet for my Rigid 1/4″ laminate trimmer. They don’t exist. But I found this and it’s made in my home area!

    Lee Valley Tools Bushing Adapters

    #27036

    Ryan
    Keymaster

    Check out the link I have in the LowRider parts link. I bought a 1/8″ collet for my 611 and it is very nice, shipping is slower than I would have liked but worth the wait. They have all kids of quality adapters.

    #27043

    P3DCNC
    Participant

    I’ll check that out at home tonight. Can’t from work.

    The collet they use in these machines looks like this: Rigid R2400 Collet

    I’ll see if they have that.

    The nice thing about the bushing is it doesn’t matter what router you have. Also, it looks tallish so that might add some rigidity to the bit, I’m hoping. I’ll pick one up on the way home tonight and try it out.

    #27049

    P3DCNC
    Participant

    Ok, so I turns out the Rigid R2400 is similar to the Bosch Colt. These guys sell collets for the Rigid R2400. Search on their site for Bosch Colt.

    https://www.thinktink.com

    >> Edit – They just called me. You can get the collet but it only works with their nut and wrench which they don’t sell anymore. The collets are there for previous customers. He did mention to check elaire so I’ll check them out tonight. FYI.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.