Create toolpath

This topic contains 4 replies, has 3 voices, and was last updated by Profile photo of ManuCNC ManuCNC 1 year ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #8431
    Profile photo of ManuCNC
    ManuCNC
    Participant

    Hi everyone
    My name Manuel (italian) and I just finished building my CNC US version of Vicious: D
    How the Alligator card 32bit I configured electronic

    I model in Fusion, but I did not understand how the CAM part …

    With ESTLcam i understand gcode the son of a figure 2d … but how do you create a toolpath like this?

    https://www.youtube.com/watch?v=f5baaSrQejA

    in 3d relief

    Sorry for my english Google 😀
    (I can’t post in the Software Section…)

    #8445
    Profile photo of vicious1
    vicious1
    Keymaster

    Load an STL in estlcam and the menu changes.

    #8459
    Profile photo of ManuCNC
    ManuCNC
    Participant

    then estlcam also creates gcode 3d components not only simple 2D shape?
    Great!

    #8735
    Profile photo of James
    James
    Participant

    I like to CAM in Fusion more than ESTLCAM. There are several VERY good videos on YouTube that are put out by Autodesk that will show you the right way to do so.

    #8737
    Profile photo of ManuCNC
    ManuCNC
    Participant

    I’ll try to look even. there is a tutorial written with various screenshots that explain the basic steps?

    Thanks

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.