Custom ToolMount

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of blueslevin blueslevin 2 months, 3 weeks ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #32915
    Profile photo of blueslevin
    blueslevin
    Participant

    Hi everybody,

    this is my first topic here. I find this project very interesting. The concept and the community are really nice.
    I started to build the MPCNC with 25mm conduits some weeks ago, but I wanted to use a ballscrew for the z-axe.
    Thus, my intention is to design a custom ToolMount with an integrated bearing in order to keep the ballscrew in place.
    Is there any chance that I could have the source of F-ToolMount.STL for 25mm conduits?

    Thank you very much in advance!!

    🙂

    #32925
    Profile photo of Ryan
    Ryan
    Keymaster

    That won’t work you need an anchor point the z motor/mounts and tool mount are part of the same system.

    #32970
    Profile photo of blueslevin
    blueslevin
    Participant

    Ho Ryan, thank you for your reply.
    Yes I know that they are on the same part. In fact, the anchor point is the ball nut that is fixed to the gantry. The ball screw will be fixed at it’s extrema as well, in order to keep it in place.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.