Dog Tag – Engraving

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Dave Gun Dave Gun 1 year ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #8942
    Profile photo of Dave Gun
    Dave Gun
    Participant

    I have been experimenting with engraving aluminum with a V tip bit. I made a dog tag for my dog Snoop.

    This is cut to a depth of .4mm with .3mm steps at 5mm/s. This was polished with a cloth buffing wheel. I cut it out with a jig saw, drilled the hole and filed the round edges. It was finished polished with the buffing wheel and then polished by hand.

    Dave

    #9041
    Profile photo of Jeffeb3
    Jeffeb3
    Participant

    Um, I think snoop dogg has two ‘g’s. 🙂

    Looks great.

    #9084
    Profile photo of Dave Gun
    Dave Gun
    Participant

    This dog is just a barker, not a rapper 🙂

    Thanks,

    Dave

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.