Drag Knife issues

This topic contains 5 replies, has 2 voices, and was last updated by Profile photo of Ryan Ryan 2 months, 3 weeks ago.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #32424
    Profile photo of Mitchell
    Mitchell
    Participant

    Hello, i am trying to cut some vinyl.
    Works pretty good so far however i have a small problem ( about 1 mm haha )
    Every sticker i cut has some uncut traces..

    Please see the picture to see my problem : Problem

    I checked the Gcode generated by Estlcam in another cnc simulator and that looks good.
    I used a 0.10 diameter bit as tool setting..

    What did i do wrong ?

    #32428
    Profile photo of Ryan
    Ryan
    Keymaster

    Use a smaller diameter if you can, and have a look at How I did it by using a lead in/out to over cut.

    Drag Knife, Vinyl Cutter

    #32429
    Profile photo of Mitchell
    Mitchell
    Participant

    Thank you, the images are not clickable.
    Could you please fix this ?

    And a smaller diamter then 0.10 is not possible..

    #32434
    Profile photo of Ryan
    Ryan
    Keymaster

    Gotcha, thanks for catching that!

    #32485
    Profile photo of Mitchell
    Mitchell
    Participant

    Thnx Ryan! i am a happy man :

    Clock

    Now i can continue building my word clock.
    The precision of the MPCNC keeps amazing me.

    #32510
    Profile photo of Ryan
    Ryan
    Keymaster

    Looks real nice!

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.