Dw 660 end Mills / bits for milling wood and ceramic tiles

New Home Forum Mostly Printed CNC – MPCNC Hardware Development – MPCNC Dw 660 end Mills / bits for milling wood and ceramic tiles

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of vicious1 vicious1 10 months, 2 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #11854
    Profile photo of Richard Rouse
    Richard Rouse
    Participant

    What type of end Mills do you recommend to be used with the dw660.

    I plan to cut / mill wood

    I would also like to try engraving ceramic tile.

    #11861
    Profile photo of vicious1
    vicious1
    Keymaster

    There are tons to use, it depends on thickness and kinds of wood. It a good idea to read up on the different style bits they make a huge difference. Check out drillman1 on ebay and his 1/8″ bits. There is one for wood, and one for thin ply or sheet material that you should get.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.