G-Code for testing the backlash

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC G-Code for testing the backlash

This topic contains 0 replies, has 1 voice, and was last updated by  Anonymous 2 years, 3 months ago.

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #2978

    Anonymous

    To run the code with a pen (sharpie etc.) installed.
    CNC suppose to do something like that: https://youtu.be/b_eVLcTpR7U

    G01 X0 Y0
    G01 X0 Y10
    G01 X10 Y10
    G01 X10 Y0
    G01 X0 Y0
     
    G01 X0 Y0 Z1
    G01 X30 Y30 Z1
    G01 X30 Y30 Z0
     
    G01 X30 Y30
    G01 X30 Y40
    G01 X40 Y40
    G01 X40 Y30
    G01 X30 Y30
     
     
    G01 X30 Y30 Z1
    G01 X0 Y0 Z1
    G01 X0 Y0 Z0
     
    G01 X0 Y0
    G01 X0 Y10
    G01 X10 Y10
    G01 X10 Y0
    G01 X0 Y0
     
    G01 X0 Y0 Z1
    G01 X30 Y30 Z1
    G01 X30 Y30 Z0
     
    G01 X30 Y30
    G01 X30 Y40
    G01 X40 Y40
    G01 X40 Y30
    G01 X30 Y30
     
     
    G01 X30 Y30 Z1
    G01 X0 Y0 Z1
    G01 X0 Y0 Z0
     
    G01 X0 Y0
    G01 X0 Y10
    G01 X10 Y10
    G01 X10 Y0
    G01 X0 Y0
     
    G01 X0 Y0 Z1
    G01 X30 Y30 Z1
    G01 X30 Y30 Z0
     
    G01 X30 Y30
    G01 X30 Y40
    G01 X40 Y40
    G01 X40 Y30
    G01 X30 Y30
     
     
    G01 X30 Y30 Z1
    G01 X0 Y0 Z1
    G01 X0 Y0 Z0
     
    G01 X0 Y0
    G01 X0 Y10
    G01 X10 Y10
    G01 X10 Y0
    G01 X0 Y0
     
    G01 X0 Y0 Z1
    G01 X30 Y30 Z1
    G01 X30 Y30 Z0
     
    G01 X30 Y30
    G01 X30 Y40
    G01 X40 Y40
    G01 X40 Y30
    G01 X30 Y30
     
     
    G01 X30 Y30 Z1
    G01 X0 Y0 Z1
    G01 X0 Y0 Z0
     
    G01 X0 Y0
    G01 X0 Y10
    G01 X10 Y10
    G01 X10 Y0
    G01 X0 Y0
     
    G01 X0 Y0 Z1
    G01 X30 Y30 Z1
    G01 X30 Y30 Z0
     
    G01 X30 Y30
    G01 X30 Y40
    G01 X40 Y40
    G01 X40 Y30
    G01 X30 Y30
     
     
    G01 X30 Y30 Z1
    G01 X0 Y0 Z1
    G01 X0 Y0 Z0
     
     
    G01 X0 Y0 Z0
    G01 X10 Y10 Z0
    G01 X0 Y10 Z0
    G01 X10 Y0 Z0
    G01 X10 Y10 Z0
    G01 X5 Y15 Z0
    G01 X0 Y10 Z0
    G01 X0 Y0 Z0
    G01 X10 Y0 Z0
     
    G01 X10 Y0 Z1
    G01 X20 Y0 Z1
    G01 X20 Y0 Z0
     
    G01 X20 Y0 Z0
    G01 X30 Y10 Z0
    G01 X20 Y10 Z0
    G01 X30 Y0 Z0
    G01 X30 Y10 Z0
    G01 X25 Y15 Z0
    G01 X20 Y10 Z0
    G01 X20 Y0 Z0
    G01 X30 Y0 Z0
     
    G01 X30 Y0 Z1
    G01 X40 Y0 Z1
    G01 X40 Y0 Z0
     
    G01 X40 Y0 Z0
    G01 X50 Y10 Z0
    G01 X40 Y10 Z0
    G01 X50 Y0 Z0
    G01 X50 Y10 Z0
    G01 X45 Y15 Z0
    G01 X40 Y10 Z0
    G01 X40 Y0 Z0
    G01 X50 Y0 Z0
     
    G01 X50 Y0 Z1
    G01 X60 Y0 Z1
    G01 X60 Y0 Z0
     
    G01 X60 Y0 Z0
    G01 X70 Y10 Z0
    G01 X60 Y10 Z0
    G01 X70 Y0 Z0
    G01 X70 Y10 Z0
    G01 X65 Y15 Z0
    G01 X60 Y10 Z0
    G01 X60 Y0 Z0
    G01 X70 Y0 Z0
     
    G01 X70 Y0 Z1
    G01 X80 Y0 Z1
    G01 X80 Y0 Z0
     
    G01 X80 Y0 Z0
    G01 X90 Y10 Z0
    G01 X80 Y10 Z0
    G01 X90 Y0 Z0
    G01 X90 Y10 Z0
    G01 X85 Y15 Z0
    G01 X80 Y10 Z0
    G01 X80 Y0 Z0
    G01 X90 Y0 Z0
     
    G01 X90 Y0 Z1
    G01 X100 Y0 Z1
    G01 X100 Y0 Z0
     
    G01 X100 Y0 Z0
    G01 X110 Y10 Z0
    G01 X100 Y10 Z0
    G01 X110 Y0 Z0
    G01 X110 Y10 Z0
    G01 X105 Y15 Z0
    G01 X100 Y10 Z0
    G01 X100 Y0 Z0
    G01 X110 Y0 Z0
     
    G01 X110 Y0 Z1
    G01 X120 Y0 Z1
    G01 X120 Y0 Z0
     
    G01 X120 Y0 Z0
    G01 X130 Y10 Z0
    G01 X120 Y10 Z0
    G01 X130 Y0 Z0
    G01 X130 Y10 Z0
    G01 X125 Y15 Z0
    G01 X120 Y10 Z0
    G01 X120 Y0 Z0
    G01 X130 Y0 Z0
     
    G01 X130 Y0 Z1
    G01 X140 Y0 Z1
    G01 X140 Y0 Z0
Viewing 1 post (of 1 total)

You must be logged in to reply to this topic.