HIJACKED MPCNC!!??

This topic contains 6 replies, has 5 voices, and was last updated by  A Trap 1 year, 7 months ago.

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #8207

    A Trap
    Participant

    So, I was building my first (MP)CNC, when my daughter laid claim to it..!! She wanted her own 3D Printer, so I conceded and gave it to her, and well, here it is.

    #8235

    nerdyrcdriver
    Participant

    Awesome job with the cable management! I need to order some drag chain for when I start wiring my build, but I doubt I will get it as clean as yours.

    #8241

    Walter
    Participant

    Why cheat and buy one when you can print the chain too

    #8243

    A Trap
    Participant

    I ordered it from Amazon (Black Plastic Drag Chain Cable Carrier 10 x 15mm for CNC Router Mill). It was a tight fit, you might want to go to with 10mmx20mm.
    The Drag Chain would get caught on one of the exposed bearings on top, so I used a scrap piece of acrylic I had laying around to support the DC. I got darn lucky that the acrylic was just long enough:)
    BTW, it took FOREVER for the Drag Chain to arrive, via slow boat from China.

    #9492

    Doreen Holley
    Participant

    Link for printed chain parts?

    #9499

    Barry
    Participant

    I’m currently printing this one. I’ll have to figure out a way to attach them, but they’re the first ones I’ve found that doesn’t require support material to print.
    https://www.youmagine.com/designs/ultimaker2-cable-chain

    #9696

    A Trap
    Participant

    Buy

    Print

    Enjoy:)

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic.