How to bring a old machine up to date

New Home Forum Mostly Printed CNC – MPCNC Your Builds – MPCNC How to bring a old machine up to date

Tagged: 

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 3 weeks, 4 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #48033

    Cesar
    Participant

    Hi guys!   Does any one have a comprehensive step by step video or list on how to bring an original mpcnc up to the latest and greatest current updates I see many post in all directions and would like to figure out how to set the stops the right way and calibrate the machine as best as possible for accuracy

    Thanks in advance

    CJ

    .

    #48037

    Ryan
    Keymaster

    Depends on what you currently have. The instructions are updated for the current parts. None are terribly different than previous versions just better. I have updated ever single part at least once, so you will have to look and see what parts you have vs what parts are current.

     

    As for the dual endstop firmware it works on any version but it is very much an advanced feature and should be used on if you fully understand why and when you would use it. https://www.vicious1.com/auto-square-dual-endstops/

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.