- June 8, 2017 at 10:06 am #35439June 8, 2017 at 12:00 pm #35448
Wowzers!June 8, 2017 at 12:55 pm #35451
Beautiful build!June 8, 2017 at 1:34 pm #35452
Need more pictures!!!June 8, 2017 at 1:35 pm #35453
+1 for more details and pictures. It looks pretty sweet. And pretty clean. Does it work?June 8, 2017 at 9:44 pm #35473July 9, 2017 at 5:52 am #37804
sorry for my english it s not my natural language, i’m french.
i’ve seen your lowrider and i expect to use the same parkside rouder (1st picture) i expect 1st using the ‘linear motion’ of the router on the Z axis.
is there a reason why you didnt use them?
is it possible to ha ve a view of the mont you use for the router?
thanks every body for showing and explaining all your work
as soon i received all my components i ll show you my version of low rider using old alloy profile hope it ll works as well as yours
thanks againJuly 9, 2017 at 8:37 am #37816July 9, 2017 at 11:02 am #37839
thanks for the video i was speaking of the base of router with spring and columns that you take off the router
i ll try to use it first as Z axis
what kind of bit do you use
are you satisfied of the parkside router or do you prefer the other parkside tool
thanksJuly 9, 2017 at 11:23 am #37842
Router is too powerful, noisy, dusty and power hungry. I prefer to use rotary tool with 2…3mm corn end mill https://www.aliexpress.com/item/5Pcs-End-Milling-Cutter-Tool-Drill-Bit-3-175mm-Shank-3mm-Cutting-Dia-Tungsten-Carbide-PCB/32702374626.html?spm=2114.13010608.0.0.xGnUyE for plywood.July 9, 2017 at 1:00 pm #37852
thanks for all the information i m continuing studying this project
and a great thanks again
You must be logged in to reply to this topic.