Larger printers you can build

New Home Forum Mostly Printed 3D Printer -MP3DP Advice – MP3DP Larger printers you can build

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Ryan Ryan 3 weeks, 5 days ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #32709
    Profile photo of John
    John
    Participant

    I was reading the FAQ and I noticed it didn’t recommend building a printer that is over 12in y’all. Is that because of stability issues with the Z axis? Does that only apply to the i3 style or also the MP CNC style?

    Thanks in advance.

    #32710
    Profile photo of Ryan
    Ryan
    Keymaster

    The MP3DP is kinda set at it’s 200mm height, the size post is for the MPCNC. hanging more than 12″ of pipe off the z axis is not going to lead to a printer that can move very fast. As I said in that post, people have done it but you really need to understand why you would want to.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.