MPCNC Modular Electronics Mount

New Home Forum Mostly Printed CNC – MPCNC Hardware Development – MPCNC MPCNC Modular Electronics Mount

This topic contains 4 replies, has 4 voices, and was last updated by  Steve 4 months ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #38065

    Renegadez
    Participant

    MPCNC Modular Electronics Mount

    https://www.thingiverse.com/thing:1045751

    has anyone tried using this Thing??

    If so I am wondering if these 3 Panels wire directly to the Ramps 1.4v board?

    Panel Volt Meter – 4.5V to 30VDC
    https://www.adafruit.com/products/575

    Panel Current Meter – 0 to 9.99A
    https://www.adafruit.com/products/574

    Panel Temperature Meter / -30 to +70 °C
    https://www.adafruit.com/products/576

    Edit: Forgot Links

    #38078

    Ryan
    Keymaster

    That mount was one of the first ones a long time ago, still seems pretty awesome but I have not used it.

    The gauges you listed, none of them plug into the ramps each link has a wiring diagram and they are all standalone.

    #38095

    Jeffeb3
    Participant

    What are you trying to guage with those guages? i.e. what temperature are you interested in? What voltage are you interested in (it would be pretty boring to read the input, it’s not changing in any significant way).

    #38112

    Renegadez
    Participant

    Voltage and operating temperature and current of the laser. I want to use.

    I believe i was incorrect these should go to the driver board for the laser

    #38330

    Steve
    Participant

    Remixed from:

    I like that thing…

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.