- November 28, 2016 at 6:41 pm #21663
I finished my MPCNC earlier this year and finally got around posting something here. It works pretty well with wood and PCBs and actually worked the first time I did a real test. The working area is about 2’x2′. The enclosure has removable plexiglass windows and does block a lot of the sound of the spindle. I posted some pictures here: https://fordsleeman.wordpress.com/2016/11/26/mpcnc-enclosure/November 28, 2016 at 6:50 pm #21664
What are the red clips holding the wood are they 3D printed? Thanks RenZNovember 28, 2016 at 7:01 pm #21665
Wow, that is a nice site! Clean just like your build I am impressed. Thanks for sharing.November 29, 2016 at 10:42 am #21732
AlvinParticipantNovember 29, 2016 at 4:10 pm #21747November 30, 2016 at 10:43 am #21856
Thanks for sharing that enclosure is mad sickness!!! Your work inspires!December 3, 2016 at 2:04 pm #22003
@renegadez, I have posted a much more detailed explanation about how I build the enclosure. https://wordpress.com/post/fordsleeman.wordpress.com/79. Hope it helps!December 7, 2016 at 3:33 pm #22221
Sorry, but I was unable to get the WordPress link to work.December 7, 2016 at 3:58 pm #22224
BarryParticipantDecember 8, 2016 at 6:29 am #22246
Sorry about that, I am not very familiar with wordpress and used the wrong url. That link above should work. Thanks Barry!December 12, 2016 at 12:44 pm #22572
Tad thank you for this I am starting my build of the CNC I recieved all the stainless and parts kit from Vicious I will attack this table ASAP Thanks So much!!
You must be logged in to reply to this topic.