Nema Dampers?

This topic contains 4 replies, has 4 voices, and was last updated by Profile photo of Barry Barry 2 months, 1 week ago.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #31787
    Profile photo of james
    james
    Participant

    Anyone use stepper dampers in their build? Or any any point to using them?

    About to get started on a small build and was curious if someone’s already tried.

    #31790
    Profile photo of Ryan
    Ryan
    Keymaster

    I’m pretty sure they don’t do anything worth spending any money on. I had a bunch of them originally and sold them all on ebay.

    #31805
    Profile photo of Barry
    Barry
    Participant

    I have them on my rostock max, but not sure if it will make a difference on the cnc.

    #31806
    Profile photo of Vincent Pollaro
    Vincent Pollaro
    Participant

    I use them on my D-Bot, but would think any vibration from the steppers would be overshadowed by the spindle anyway. Probably wouldn’t hurt, but also likely not necessary.

    #31813
    Profile photo of Barry
    Barry
    Participant

    Pretty sure they’ll flex too much on a cnc. I get some waggle if I really crank up the speed of my printer.

Viewing 5 posts - 1 through 5 (of 5 total)

You must be logged in to reply to this topic.