Random vertical/horizontal lines

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC Random vertical/horizontal lines

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Ryan Ryan 1 month, 1 week ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #33971
    Profile photo of thesfreader
    thesfreader
    Participant

    I’ve tried a few times CNCing some text for family on a plate. However, at some arbitrary (and non reproductible) times in the drawing, the RAMPS seems to command a vertical (down) or sideways (left) line before coming back and continuing the print as if nothing was out of the ordinary.

    Since the locations where the lines appear differ from one “run” to the next, I suppose it’s not the gcode (generated with ESTLCAM).

    Did anyone have this problem ?

    #34018
    Profile photo of Ryan
    Ryan
    Keymaster

    loose wire, bad usb connection? If you use a USB and your computer turns off the screen that can happen.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.