Repetier problem

This topic contains 1 reply, has 2 voices, and was last updated by  Ryan 1 year, 9 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #6012

    David
    Participant

    Hello,
    I tried to install a 4th stepper for extruder and now all commands are waiting in repetier.
    But there is a connection.

    Thanks for you advices.

    Barlouka

    #6015

    Ryan
    Keymaster

    These things should all be included in your post. It makes it much faster to diagnose problems.

    1) Did you buy everything from here?
    a)If you didn’t or changed some things please don’t leave out any details.
    b)What firmware?

    2) Are you using end stops?
    a)If so please disconnect them.
    b) If the problem is still there leave them disconnected while troubleshooting.

    3) Are you using all my recommended parts?
    a) If not please list what parts you used.
    b) I am not against other peoples parts but most of them have not actually even been tested on a working machine. I am against people making “improved” parts when they have not even tried mine. Please, “don’t fix what ain’t broke”.

    4) Include a picture so obvious errors might be spotted.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.