SD card on full graphic smart controller not working

New Home Forum Mostly Printed CNC – MPCNC Troubleshooting – MPCNC SD card on full graphic smart controller not working

This topic contains 2 replies, has 2 voices, and was last updated by Profile photo of Ryan Ryan 3 weeks, 3 days ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #36898
    Profile photo of Kirklan
    Kirklan
    Participant

    Hi, I have this full graphic smart controller:

    Full Graphic Smart Controller, Big

    I can get it to control my CNC, but I can’t get it to read an SD card. I have tried various different cards, all 1 GB or 2 GB, and 1 16 GB SDHC card. I have tried formatting both FAT and FAT 32, and I have tried formatting both with the Windows utility and with SDFormatter. I have also tried wiggling the card and removing/reinserting, but no matter what I do, the display always reads “no SD card.”

    I bought everything from here. Any other ideas of what else I could try?

    Thanks,

    Kirklan

    #36904
    Profile photo of Ryan
    Ryan
    Keymaster

    If you have tried resetting with the card in and it still doesn’t work send it in and I will test/fix/or replace it.

    #36905
    Profile photo of Ryan
    Ryan
    Keymaster

    Actually, try swapping the cables, one is basically for power and the other is for the card. If there is a bad connection or a broken wire that could fix it.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.