SDHC card not readable?

This topic contains 3 replies, has 3 voices, and was last updated by Profile photo of Fingerss Fingerss 1 month ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #27787
    Profile photo of Fingerss
    Fingerss
    Participant

    Is there a secret to getting the LCD controller to display the files stored on a SDHC card? I have 2 new sd cards one formatted FAT32 and one not formatted with a xxx.nc file on them and both will indicate being inserted but will not list the files in the menu. I can manually move the axes via the controller.
    I’m using all vicious equipment and have flashed with this file.
    rc7_mpcnc_lcd_9916

    #27793
    Profile photo of vicious1
    vicious1
    Keymaster

    Rename it to .gcode. I don’t think the LCD sees .nc.

    #28222
    Profile photo of Bryan
    Bryan
    Participant

    Mine has to be .gco or .nco on a FAT32 card. not sure if theres a size limit to the card. Mine are 2gig. (recycled old camera cards)

    #28262
    Profile photo of Fingerss
    Fingerss
    Participant

    Thanks Bryan.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.