Securely lock axys in 3d printerNew Home › Forum › don’t use this one, I need to sort and delete -Troubleshooting › Securely lock axys in 3d printerTagged: 3d, axys, printer, xThis topic contains 3 replies, has 2 voices, and was last updated by vicious1 9 months ago.Viewing 4 posts - 1 through 4 (of 4 total)Author PostsJuly 1, 2016 at 6:00 am #14220 AnonymousHello! I’m assembling 3d printer, how can I lock 8mm x axys? For the other axys I’ve used cable ties but for the x axys I dont’ know. Thank’s!July 1, 2016 at 10:56 am #14227 vicious1KeymasterDoes this help?Attachments:IMG_20160701_11231701.jpgJuly 1, 2016 at 1:49 pm #14240 AnonymousHello! thanks but my trouble is not the belt but the 8mm rods of the X axis. Look these photos, I’ve blocked with cable tie Y axis and Z axys. I don’t know how can I do for the X axis. ThanksJuly 1, 2016 at 1:51 pm #14244 vicious1KeymasterI haven’t needed any cable ties mine don’t move.The one you are asking about actually gets clamped by the tension of the bearing screw.Author PostsViewing 4 posts - 1 through 4 (of 4 total)You must be logged in to reply to this topic.