Spool Shelf using 3/4" EMT & 8×10 Metal Shelf Brackets

New Home Forum Things You Have Made Spool Shelf using 3/4" EMT & 8×10 Metal Shelf Brackets

This topic contains 2 replies, has 3 voices, and was last updated by  gerry robertsons 7 months, 1 week ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #27419

    geodave
    Participant

    I had been trying to come up with an inexpensive & useful shelf for holding plastic filament. While looking around my room, the shelf brackets I was using came to mind. Seemed like I could make a simple plastic bracket to mount on each one & install the brackets upside down. I put it above my door which is unseen until you walk into the room. I am pretty happy with it.
    Here is the design & further info on thingiverse if anyone is interested.
    http://www.thingiverse.com/thing:2085647

    #27429

    Jeffeb3
    Participant

    Could it be rigged to drop water on an unsuspecting victim? April is coming…

    #29200

    gerry robertsons
    Participant

    That is pretty impressive, I would love to create that my own and thinking if how this one works on my current interiors that I have obtained at http://caldwells.com/, hope that this gives me good feature for the door.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.