Starting 36"X60" build

This topic contains 1 reply, has 2 voices, and was last updated by Profile photo of Daniel Huss Daniel Huss 9 months, 3 weeks ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #13293
    Profile photo of Arthur Padget
    Arthur Padget
    Participant

    I am starting this build once my bundle arrives. Ryan, FYI mine is one of the two bundles that were ordered on Friday. Anyways I know that I have a rather long axis. I was curious after hearing about them for a while, if anyone could point me to the mid rail support parts that have been mentioned.

    I am also curious to know if anyone has built a machine this long, and if they had any big issues?

    As a preemptive answer I am mostly planning on mostly carving very short depths into plywood, mdf and plywood. I am also planning on “drilling” holes in the material with the end mill as well. Is this machine too big to cut material out, for example would I be able to build the mostly milled 3d printer that Ryan designed?

    Thanks for any and all answers!! I hope everyone is having a great weekend!!
    -AGP

    #13400
    Profile photo of Daniel Huss
    Daniel Huss
    Participant

    This printed support has been around for a while, https://www.thingiverse.com/thing:1160962

    if you haven’t already I think there’s a couple build logs on the forums here that are fairly large.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.