Stronger version

This topic contains 10 replies, has 2 voices, and was last updated by  Ryan 1 year, 5 months ago.

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #12585

    Christian_Norway
    Participant

    Do anyone know of someone that have build a 3D printable model based on 35 mm conduit pipe (or other larger dimensions), and/or with stronger stepper motors. Not sure why I would need this yet, but if I’m going to build one I thought it might be worth building a stronger version that can also handle aluminium milling even better.

    #12594

    Ryan
    Keymaster

    Is your main goal milling only aluminum? What kind of parts? what size foot print, If you make the machine smaller than the recommended size aluminum will not be an issue. I cut aluminum fine at 25x30x2. Smaller and I could go much faster. New parts are on the horizon that will also make it more rigid.

    If you have a specific need I can help a little better but as it is I am doing pretty good with aluminum.

    The one answer I can give you is we are not lacking in power. Other machines use NEMA 23’s because they only have 1 stepper per axis, not an issue here. Matter of fact we aren’t even running these steppers at full power.

    #12602

    Christian_Norway
    Participant

    Hi,

    Thanks for a very quick answer. No specific need identified yet, but if I am to build one I rather build it a bit more rigid if it would help the end quality. But I guess I can always start with the basic, and make adjustments later..

    Anyway, thanks for great effort in making this available for everyone to copy 🙂

    #12603

    Christian_Norway
    Participant

    A by the way. Is there a good overview of add-ons / modifications available for the CNC machine somewhere? eg. the ones that you recommend vicious1

    #12605

    Ryan
    Keymaster

    Always my suggestion along with start as small as possible. Just because it can be huge doesn’t mean it has to be.

    #12606

    Ryan
    Keymaster

    Not really, most are pretty specific as in different tool mounts.

    This coming week I think the new center parts will be coming out, so you might want to start printing the corner and roller assemblies first. The tool mounts will also be changing, for the better 1 mount will fit all three machines, less design fragmentation.

    #12607

    Christian_Norway
    Participant

    Great to hear that is it actively being developed further. Great work 🙂
    Do you accept donations?

    #12608

    Christian_Norway
    Participant

    I found the donation link 🙂 Sent you a little money as a token of my appreciation. Keep up the good work 🙂

    #12611

    Ryan
    Keymaster

    That is incredibly generous of you! That completely changes my day in the best way. Thank you so much for the support. I hope you end up making one and enjoy it as much as most of us do!

    I will add you name to the list ASAP.

    #12613

    Christian_Norway
    Participant

    No need to add my name. Just tried to be nice. It was anyhow less than you deserve.

    #12614

    Ryan
    Keymaster

    Already added.

    Thanks again!

Viewing 11 posts - 1 through 11 (of 11 total)

You must be logged in to reply to this topic.