Sweden

New Home Forum International Sweden

This topic contains 15 replies, has 7 voices, and was last updated by Profile photo of Mickael Jonsson Mickael Jonsson 6 months, 3 weeks ago.

Viewing 16 posts - 1 through 16 (of 16 total)
  • Author
    Posts
  • #5103
    Profile photo of Mickael Jonsson
    Mickael Jonsson
    Participant

    Here we can talk about problems when printing an geting parts in sweden.

    #5104
    Profile photo of vicious1
    vicious1
    Keymaster

    I’ve shipped quite a few kits to Sweden. There should be a lot of user already up and running. I actually just shipped a LCD there this morning.

    #5133
    Profile photo of dbostream
    dbostream
    Participant

    I have all the parts now except for the printable ones. I hope I will have time to print them during the Christmas/New year vacation and get the machine up and running.

    If anyone is having trouble finding cheap 25mm tube I can recommend having a look at Swedol. Picked up some galvanized steel approx. 3mm thick so it is very robust and it seems smooth enough to me.

    #5879
    Profile photo of Jocke Vindgard
    Jocke Vindgard
    Participant

    Do you have a link to the tubes? I have tried to find it at Swedol but without success. Me and a friend are sourcing all the parts and have found tubes but they are only 1.5mm thick, I don’t know if that’s going to a problem or not. We assembled one of the rollers and it was really exiting. We found out that the pipe diameter was between 24.95mm and 25.05mm and that actually made a difference in how “tight” the bearings were with the tube.

    Here’s the link to the tubes if anyone is interested https://www.byggmax.se/forvaring/garage-och-verkstad/ror-och-rorsystem/ror-2200-habo-krom-p7270147

    #5888
    Profile photo of dbostream
    dbostream
    Participant

    I haven’t found the pipes on their website, my dad went to the store and got mine. He asked they guy working their if they had any pipes, they did and they could even cut the exact length I wanted.

    The pipes are slightly larger than 25mm but I have test printed a roller and it works well.

    #5891
    Profile photo of Jocke Vindgard
    Jocke Vindgard
    Participant

    Ok! Thanks anyway.

    #5892
    Profile photo of Jocke Vindgard
    Jocke Vindgard
    Participant

    Got a reply from a local dealer http://www.metallgrossisten.se close to where I live. 216kr for 6m 25x2mm. And the tubes/pipes are precision steel pipes or “precisionsstålrör” which sounds awesome. Since I didn’t know what that meant I did some research.

    Stålrör som kännetecknas av tunn väggtjocklek, stor måttnoggrannhet och god ytkvalitet. Avsedda för mindre konstruktioner.

    or in english

    Steel pipes are characterized by thin wall thickness , dimensional accuracy and good surface quality . Intended for smaller structures.

    Will post some more information when I have bought and tried the pipes out.

    #5902
    Profile photo of vicious1
    vicious1
    Keymaster

    Just because it has the word precision in it I would assume it will be great. What we use here is the least precision you can buy and is actually rated by the ID. Our cheapie stuff works great I’m sure yours will be better.

    #6467
    Profile photo of Jocke Vindgard
    Jocke Vindgard
    Participant

    I’m going to buy the pipes this friday, will report back to you about my findings.

    #6991
    Profile photo of Andreas Jansson
    Andreas Jansson
    Participant

    Hello, i live close to uppsala and started this project 5 days ago.
    I did buy the tubes frpm Byggmax, lets se what happens. It was only avalibe online, so I’m still waiting for them.
    Also i have to tell you that i got the 608 bearings Abec1 from 3d-grottan.se for just 3SEK a piece. Still waiting for them also 🙂

    #7348
    Profile photo of Jocke Vindgard
    Jocke Vindgard
    Participant

    Interesting Andreas, I am curious to hear how the tubes work.

    That was a good price on the bearings. I think I paid just below 3sek/pcs for the rubber sealed ones. But that was from China.

    #14496
    Profile photo of Joakim
    Joakim
    Participant

    How is your machine working? I have just decided to build one… Any advice you can give me? Are the machine stable?

    #14595
    Profile photo of Markus
    Markus
    Participant

    Om det är någon som vill ha hjälp att printa vissa delar i abs (de större delarna kväver en uppvärmd kammare) kan ni skicka ett pm till mig. Jag har skrivit ut några av dessa kitt helt i abs.

    #15690
    Profile photo of Mickael Jonsson
    Mickael Jonsson
    Participant

    Were can i find a guid how to wire everything. i started my project a long time ago, so i got everythig then, but now when im starting tu build it, i see that i have 5 steper controlers, but on the pictures thers only 3, i cant remember why i got 5.

    #15691
    Profile photo of vicious1
    vicious1
    Keymaster
    #17015
    Profile photo of Mickael Jonsson
    Mickael Jonsson
    Participant

    Guys hows everything going? i have put everything together, but i feals to tight and i dont know what to do!?
    all parts are 25mm and i have 25mm steal pipe. and some bearings in the roller blocks are not toutching the pipe, iv tested to print
    new blocks alsow.

    im realy stuck.

    Tack!

Viewing 16 posts - 1 through 16 (of 16 total)

You must be logged in to reply to this topic.